wiki:ChipBasedQcPipelineIdea

The idea of chip-based QC pipeline

Below a detailed outline of steps which should be included in ChipBasedQcPipeline is provided. This document also suggest the CipBasedQcPipelineWorkflow? sequence and principal ideas for solutions. This document does not specify exact tools to be used; as most of operations are data manipulations, it will be up to the involved analysts to decide what tool may be more convenient for them and formulate the CipBasedQcPipelineWorkflow?. The actual implementation of the workflow should allow automatic reproduction of the results and application of the same workflow to new data. This is not only important from good practice point of view, but also keeping in mind that more data will come to the same pipeline in the future.

The document assumes VcfGtDataFormat (in particular, VCF v.4 format) is used; “+” strand is used for sequencing data. It is assumed that chip data come in ChipGtDataFormat.

CHIP-VCF BUILD AND DBSNP MATCHING TABLE

Before starting, check what is the reference build used by VCF files. Next, what is dbSNP version used to name the SNPs. If any of these (and/or strand is not always ‘+’ in chip data), arrange tab-separated file containing conversion table (name: chip_data_conversion_table_yyyy.mm.dd.txt):

Header line:

CHRC POSC SNPC STRANDC A1C A2C CHRV POSV SNPV A1V A2V

Next lines should all contain 12 tab-delimited values. There should be no missing values.

  • CHR[C/V]: chromosome SNP is located at, according to Chip [C] and VCF [V] build versions <integer from 1 to 22 for autosomes, “X” for X-chromosome, and “Y” for Y-chromosome>
  • POS[C/V]: chromosomal position, according to Chip [C] and VCF [V] build versions <integer>
  • SNP[C/V]: SNP rs-name, according to Chip [C] and VCF [V] dbSNP versions <alphanumeric>
  • STRANDC: strand in chip annotation <single character, either “+” or “-“>
  • A1C: first allele in chip annotation <single character, either “A”, “C”, “G” or “T”>
  • A2C: second allele in chip annotation <single character, either “A”, “C”, “G” or “T”>
  • A1V: (translated) first chip allele (A1C) according to “+” strand on VCF build <single character, either “A”, “C”, “G” or “T”>
  • A2V: (translated) second chip allele (A2C) according to “+” strand on VCF build <single character, either “A”, “C”, “G” or “T”>

Questions:

  • Q: what is the build and dbSNP version used by chip and VCF?
  • Q: how many SNPs changed the name in VCF build?
  • Q: how many SNPs changed the strand in VCF build?
  • Q: provide a 2x2 table (name change/not) x (strand change/not)

Note that in future, samples typed using a number of different Chip platforms will be coming in. Therefore above step should not assume a particular chip is used!

UPDATED CHIP GENOTYPES

Using above described translation table, generate updated chip genotypes file (name: chip_genotypes_yyyy.mm.dd.txt)

This is a tab-delimited text file containing a table. The header line is

ID SNPV QUALCHIP A1VCHIP A2VCHIP GTCHIP

Next lines should all contain 5 tab-delimited values. Use “.” (dot) for missing.

  • ID: sample ID (genotyped individual’s code) <alphanumeric>
  • SNPV: SNP rs-name, according to VCF dbSNP version <alphanumeric>
  • QUALCHIP: calling quality for the individual genotype
  • A1VCHIP: first allele the personal genotype, translated according to “+” strand on VCF build <single character, either “A”, “C”, “G” or “T”>
  • A2VCHIP: second allele the personal genotype, translated according to “+” strand on VCF build <single character, either “A”, “C”, “G” or “T”>
  • GTCHIP: genotype with alleles in alphabetic order, <two characters, each either “A”, “C”, “G” or “T”>

Questions:

  • Q: do all SNPs in chip data have rs-number?
  • Q: what alleles are observed in chip data? Only A/T/G/C?
  • Q: are all SNPs bi-allelic?

EXTRACTION OF CHIP SNPS FROM VCF FILE

From VCF, extract only lines containing SNPs also observed in the chip (see SNPV column of “chip_data_conversion_table_yyyy.mm.dd.txt”)

Parse extracted lines, and arrange “Annotation” and “Genotypic” tables

Annotation table (name: VCF_annotation_yyyy.mm.dd.txt). Tab-delimited file with header lines (and consequently extracting following columns from VCF):

CHROM POS ID REF ALT QUAL FILTER INFO

At the beginning of the file, add meta-info from VCF file

Genotypic table (name: VCF_genotypes_yyyy.mm.dd.txt). Tab-delimited file containing following information. Header line:

ID SNPV GTVCF GQ DP ...

Next lines should all contain XXX tab-delimited values. Use “.” (dot) for missing.

  • ID: sample ID (genotyped individual’s code) <alphanumeric>
  • SNPV: SNP rs-name, according to VCF dbSNP version <alphanumeric>
  • GTVCF: genotype with alleles in alphabetic order, <two characters, each either “A”, “C”, “G” or “T”>. This can be done by mapping the numbers provided in VCF GT field to REF and ALT and then ordering.
  • GQ, DP: directly from VCF file
  • …: factors potentially associated with quality of the sequencing data, summarized in FactorsRelatedToSeqDataQuality.

Merge chip and VCF genotypic tables (“chip_genotypes_yyyy.mm.dd.txt” and “VCF_genotypes_yyyy.mm.dd.txt”) using ID and SNPV as key variables. Keep all chip genotypes, substituting missing (“.”) when no information is available from VCF. Name the table “merged_chip_and_VCF_genotypes_yyy.mm.dd.txt”.

Questions:

  • Q: What is count and proportion of genotypes that do not match between GTCHIP and GTVCF? How much these counts/proportions changes if dropping rows with QUALCHIP < X (vary X)? How much these counts/proportions changes if dropping rows with GQ (DP) < X (vary X)?
  • Q: What is proportion of false-positive and false-negative findings in our study, if we do not take trio structure into account?
  • Q: Find out QC metrics thresholds maximizing specificity and sensitivity.

Update the table with variable “CHIPVCFMISMATCH” (1 if mismatch, 0 for match, missing (“.”) if any is missing).

  • Q: Explore, which variables are significant predictors of mismatch using multiple logistic regression.

CHIP SNPS MISSING FROM VCF

Write the list of the chip SNPs not in VCF into the file “list_of_chip_snps_missing_in_VCF_yyyy.mm.dd.txt” (single column containing SNPV name). This should be done when matching chip SNPs with VCF SNPs (see section “EXTRACT CHIP SNPs FROM VCF”)

  • Q: How many variants do we miss in VCF (how many SNPs in file list_of_chip_snps_missing_in_VCF_yyyy.mm.dd.txt)?

For each SNP in list_of_chip_snps_missing_in_VCF_yyyy.mm.dd.txt, based on chip_genotypes_yyyy.mm.dd.txt derive frequency from chip data and arrange the following table (name: annot_chip_snps_missing_in_VCF_yyyy.mm.dd.txt). The header line should contain

SNPV A1V A2V FREQA1V

Each next line should contain 4 values delimited by tab; SNPV, A1V, and A2V explained above (the same as in “chip_data_conversion_table_yyyy.mm.dd.txt” file). FREQA1V is a floating-point frequency of allele “A1V”.

  • Q: Does the distribution of frequency of missed variants match the expected under the assumption that we miss at random because of limited #chromosomes and coverage (for each trio we read two chromosomes at 12x and 2 chromosomes at 24x)
Last modified 7 years ago Last modified on Sep 26, 2010 7:44:00 PM